Previous
Use this function if you want to interrupt a long copy job to make urgently needed copies.
You cannot use the Interrupt Copy function when fax originals are being scanned.
You cannot use the Staple function with this function if another copy job is already using the Staple function.
Press [Interrupt mode].
Remove the originals that were being copied.
Place the originals you want to copy.
Press [Start].
The machine starts making copies.
When copying is complete, remove the originals and copies.
Press [Interrupt mode].
Replace the originals that you were copying, and then press [Start].
Follow the instructions on the screen.
The previous copy job settings are restored. Simply press [Start] to continue copying from where it left off.
