Previous
Configuration:
Console
Hard disk:
320 GB × 2
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy/print process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Fusing belt type
Resolution*1:
Scanning originals: 600 dpi
Copying: 1200 × 4800 dpi
Resolution*2:
1200 × 4800 dpi
Exposure glass*1:
Stationary original exposure type
Original reference position*1:
Rear left corner
Warm-up time
360 seconds or less (23°C (73.4°F), rated voltage)
Originals*1:
Sheet, book, three-dimensional object
Maximum original size (ADF, exposure glass) *1:
(mainly Europe)A3
(mainly North America)11 × 17
Paper size:
Trays 1–3:
For details, see Recommended Paper Sizes and Types.
Duplex:
A3
, A4
, A5, A6, B4 JIS, B5 JIS, B6 JIS,11 × 17
, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K,12 × 18
, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 191/5, 13 × 19, 123/5 × 191/5, 123/5 × 181/2, 13 × 18, SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, 81/2 × 132/5Duplex (custom size):
Vertical: 105.0–330.2 mm (4.14–13.00 inches)
Horizontal: 139.7–487.7 mm (5.50–19.20 inches)
Paper weight:
Trays 1–3: For details, see Recommended Paper Sizes and Types.
Duplex: 52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index)
For details about and recommendations concerning thick paper, see Thick paper.
Missing image area (Copier) *1:
Leading edge: 4.0 ± 0.5 mm (0.16 ± 0.02 inches)
Trailing edge: 4.0 ± 1.0 mm (0.16 ± 0.04 inches)
Left and right edges: 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
First copy/print time:
Type 1: 6.3 seconds
Type 2: 5.6 seconds
Type 3: 4.6 seconds
(A4
, 81/2 × 11, delivered face down, feeding from tray 1, on the exposure glass)Type 4: 5.6 seconds
Type 5: 4.6 seconds
(A4
, 81/2 × 11, feeding from tray 1)
Copy/print speed:
Type 1: 96 sheets/minute (A4
, 81/2 × 11)Type 2: 111 sheets/minute (A4
, 81/2 × 11)Type 3: 136 sheets/minute (A4
, 81/2 × 11)Type 4: 111 sheets/minute (A4
, 81/2 × 11)Type 5: 136 sheets/minute (A4
, 81/2 × 11)
Reproduction ratio*1:
- (mainly Europe)
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
- (mainly North America)
Preset reproduction ratios (%):
Enlargement: 400, 200, 155, 129, 121
Full size: 100
Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom:
From 25–400% in increments of 1%
Maximum continuous copy/print run:
9,999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1 (Tandem tray): 2,000 sheets (1,000 sheets × 2)
Trays 2 and 3: 500 sheets
Power requirements:
- (mainly Europe)
220–240 V, 16 A, 50/60 Hz
- (mainly North America)
208–240 V, 20 A, 50/60 Hz
Power consumption
- (mainly Europe)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Ready
450 W
450 W
450 W
420 W
420 W
During printing
1,800 W
2,000 W
2,250 W
1,900 W
2,200 W
Maximum
2,030 W
2,240 W
2,480 W
2,280 W
2,240 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Maximum
2,840 W
3,010 W
3,350 W
2,810 W
3,150 W
The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray 7), interposer, and Booklet Finisher SR5060.
- (mainly North America)
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Ready
450 W
450 W
450 W
420 W
420 W
During printing
1,800 W
2,000 W
2,250 W
1,900 W
2,200 W
Maximum
2,010 W
2,180 W
2,480 W
2,100 W
2,440 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Maximum
2,800 W
3,020 W
3,270 W
2,820 W
3,070 W
The complete system consists of the main unit, decurler unit, anti-humidity heater, three-tray wide LCT, multi bypass tray (Tray 7), interposer, and Booklet Finisher SR5060.
Dimensions:
Types 1, 2, 3 (W × D × H up to the surface of the ADF exposure glass) *3
1,141 × 900 ×1,020 mm (45.0 × 35.5 ×40.2 inches)
Types 4, 5 (W × D × H up to the top board (excluding the control panel and the attention light)) *3
1,141 × 900 ×1,020 mm (45.0 × 35.5 ×40.2 inches)
Space for main unit (W × D) *3:
1,141 × 900 mm (45.0 × 35.5 inches)
Noise emission (mainly North America)
Sound power level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
61.5 dB (A)
66.0 dB (A)
73.5 dB (A)
66.0 dB (A)
73.5 dB (A)
Copying/Printing
74.5 dB (A)
76.0 dB (A)
78.5 dB (A)
76.0 dB (A)
78.5 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
70.0 dB (A)
70.0 dB (A)
77.5 dB (A)
70.0 dB (A)
77.5 dB (A)
Copying/Printing
80.0 dB (A)
80.0 dB (A)
82.5 dB (A)
80.0 dB (A)
82.5 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
55.5 dB (A)
60.0 dB (A)
67.5 dB (A)
60.0 dB (A)
67.5 dB (A)
Copying/Printing
68.5 dB (A)
70.0 dB (A)
72.5 dB (A)
70.0 dB (A)
72.5 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Type 5
Stand-by
64.0 dB (A)
64.0 dB (A)
71.5 dB (A)
64.0 dB (A)
71.5 dB (A)
Copying/Printing
74.0 dB (A)
74.0 dB (A)
76.5 dB (A)
74.0 dB (A)
76.5 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, three-tray wide LCT, the high capacity stacker, and Booklet Finisher SR5060.
Weight:
Types 1, 2, 3:
Approx. 425 kg (937.0 lb.)
Types 4, 5:
Approx. 410 kg (903.9 lb.)
*1 Types 1 to 3
*2 Types 4 to 5
*3 When the main unit alone is installed, the width with the sound insulation cover attached is 1,199 mm. It is recommended to attach the sound insulation cover when the Large Capacity Tray is not attached.
