Skip header
 

Configuring Quick Card Authentication

Before configuring the setting, make sure that administrator authentication is properly configured under "Administrator Authentication Management".

1Log in as the machine administrator from the control panel.

2Press [User Tools] () on the top right of the screen to close the initial settings screen.

If the message “You do not have the privileges to use this function.” appears, press [Exit].

3Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

4Press [].

5Press the [Quick Card Authentication Config.] icon.

6Press [Use Authentication].

7Following the instructions displayed on the screen, turn off the main power switch, and then turn it on again.