Skip header
 

Replacing Other Consumables

Refer to the maintenance guide provided with the new items for the replacement.

WARNING

  • Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite on contact with naked flame.

CAUTION

  • Store toner (new or used), toner containers, and components that have been in contact with toner out of reach of children.

  • The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and wait at least an hour after power off before replacing parts. Not allowing the printer to cool may result in burns.

Important

  • Exposure to light reduces black drum unit/color drum units performance. Replace the unit as quickly as possible.

  • Do not pull out the black drum unit/color drum units quickly or with force as it may fall.

  • Take care that nothing comes into contact with the top surface of the black drum unit/color drum units.

  • When holding the black drum unit/color drum units, grab the green grip on the left and the handle on the front together. Do not move the black drum unit/color drum units by only grabbing the grip. Doing so may damage the grip.

  • Waste toner bottles cannot be reused.

  • Purchasing and storing extra waste toner bottles is recommended.

  • Before removing the waste toner bottle from the printer, spread paper or some other material around the area to keep toner from dirtying your workspace.

Black Drum Unit/Color Drum Unit

Replace the drum unit when the following messages appear on the display:

“Replacement of Black Photoconductor Unit is now necessary. Replace Black Photoconductor Unit.”

“Replacement of Color Photoconductor Unit is now necessary. Replace Color Photoconductor Unit.”

When the following message appears on the display, the drum unit should be replaced soon.

“Replacement of Black Photoconductor Unit will soon be necessary. A new Black Photoconductor Unit is required. Please contact your local vendor.”

“Replace Black Photoconductor Unit.”

“Replacement of Color Photoconductor Unit will soon be necessary. A new Color Photoconductor Unit is required. Please contact your local vendor.”

“Replace Color Photoconductor Unit.”

Fuser Unit/Paper Transfer Unit/Dust Filter

Replace the fuser unit, the paper transfer unit, and the dust filter when the following message appears on the display:

“Replacement of Fuser Unit is now necessary. Replace Fuser Unit.”

When the following message appears on the display, the fusing unit should be replaced soon.

“Replacement of Fuser Unit will soon be necessary.”

Intermediate Transfer Unit

Replace Intermediate Transfer Unit when the following message appears on the display:

“Replacement of Transfer Unit is now necessary. Replace Transfer Unit.”

When the following message appears on the display, Intermediate Transfer Unit should be replaced soon.

“Replacement of Transfer Unit will soon be necessary.”

PreviousNext