Skip header
 

Printed documents can be folded using the optional Booklet Finisher attached to the machine.

The fold function can be specified in the [Finishing] menu on the [Detailed Settings] tab. This function is available for the PCL 6 printer driver and PostScript 3 printer driver. For printing methods, see the printer driver Help.

Important

  • For details about the optional units required for this function, see Functions Requiring Optional Configurations.

  • When bidirectional communication is disabled, configure option settings for the machine using the printer driver. If options are not set correctly in the printer driver, you cannot make fold settings even if a finisher with the fold function is installed. For details, see "Configuring Option Settings for the Printer", Driver Installation Guide.

Note

  • Collate is automatically enabled if Half Fold is specified.