Previous
Collate may be canceled under the following conditions:
Conditions where Rotating Collate will be canceled
Under the following conditions, Rotating Collate will be canceled and Shift Collate will be applied instead.
When combined with the staple function.
When combined with the punch function.
When combined with the fold function.
When jobs containing pages of various sizes are set.
When a paper tray is specified.
When combined with the cover sheet or back cover sheet functions.
When combined with the slip sheet function.
When combined with the chaptering function.
When a custom size paper is set.
When the output tray has the shift function.
Conditions where Shift Collate will be canceled
When the output tray does not support the shift function.
When only one page is printed.
If the information icon (
) is displayed next to the "Collate:" list in the PCL 6 printer driver or PostScript 3 printer driver, you cannot specify collate function. Click the information icon () to check why collate function is unavailable.If the information icon (
) is displayed next to the "Ignore Application Collate" check box in the PCL 5c printer driver, you cannot change the collate setting. For details, click the information icon ().When Collate or Rotating Collate is specified using the printer driver, make sure [Application Collate] is not selected. The output may not be what you require. Specify [Printer Collate] when printing the document.
The paper size and number of sheets supported by Collate, Rotating Collate, and Shift Collate functions differ depending on the attached option. For details, see Specifications for Finisher SR3210, Specifications for Booklet Finisher SR3220, Specifications for Finisher SR3230.
