Skip header
 

Changing to a Size That Is Not Automatically Detected

If you load a paper size that is not selected automatically, specify the paper size using the control panel.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration).

3Press [Tray Paper Settings].

4Select a tray from [Tray Paper Size: Tray 2] to [Tray Paper Size: Tray 5] for which you want to change the paper size.

5Select the loaded paper size, and then press [OK].

Operation panel screen illustration

6Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

7Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

Note

  • For details about paper sizes selected automatically, see Recommended Paper Sizes and Types.

  • If you want to print on paper that is selected automatically after printing on a paper size that is not selected automatically, you must return the setting to [Auto Detect]. Reload the paper, and select [Auto Detect] in Step 5.