Previous
When operating a machine for which user authentication is specified, you can log in to the machine without entering a user name and password by holding your smart device near its operation panel.
For details about RICOH Smart Device Connector, see the manuals for RICOH Smart Device Connector.
To use this function, enable the Quick Card Authentication function and Bluetooth Authentication Plugin.
Register the smart device to the printer using the Quick Card Authentication function before using this function.
If the machine's Bluetooth setting is enabled and Quick Card Authentication is set to "Bluetooth", you can log in to the machine by holding a smart device over the operation panel.
To use a smart device, it is necessary to enable the Bluetooth setting and start RICOH Smart Device Connector.
The smart device's hardware and operating system must support Bluetooth Low Energy (BLE).
Check that the Bluetooth function of the smart device is enabled.
On the operation panel of the machine, display the authentication screen of Quick Card Authentication.
On the menu of RICOH Smart Device Connector, flick the screen to the left or right to select [Login Machine].
Press [Login / Logout].
Touch the smart device to the Bluetooth label on the operation panel of the machine.
The smart device is connected with the machine, and login is now complete.
You cannot log in to the printer by holding the smart device near its operation panel while the printer is in Sleep mode.
If a user waves a smart device over a machine another user is logged in to, the user who logged in previously is logged out and the newer user logs in.
