Top Page > Connecting the Machine/System Settings > Connecting the Machine > Connecting the Machine to a Telephone Line and Telephone > Connecting the Telephone Line 
(mainly Europe and Asia)
Previous
To connect the machine to a telephone line, use a snap-in modular type connector.
Make sure the connector is the correct type before you start.
LINE (G3 interface unit connector)
Connect a telephone line.
TEL (External telephone connector)
Connect the optional handset or an external telephone.
If a cap has been inserted in the "TEL" connector, remove it before starting to use this connector.
If you connect a modular cable to the G3 interface unit connector, make two loops 1.5 cm (0.6 inch) (1) from the end of the modular cable (connection side to the machine) and attach the included ferrite core to the loops as shown.
