Skip header
 

Procedure for Stamp Text (classic)

1Press [Edit / Color].

Operation panel screen illustration

2Press [Stamp] twice.

3Press [Stamp Text].

4Press [Change Text].

5Enter stamp text, and then press [OK].

6Press [Change].

7Select the stamp position, and then press [OK].

Operation panel screen illustration

8Press [All Pages] or [1st Page Only] to select the print page.

9Press [Stamp Color].

10Select the stamp color, and then press [OK].

11Press [OK] three times.

Note

  • You can enter up to 64 characters.

  • When Auto Clear is done, [Reset] is pressed, or the power is turned off, the text is cleared. To save the typed text, you can register them in a program. For details about programs, see "Registering Frequently Used Functions", Convenient Functions.

  • Depending on the stamp position, parts of the text might not be copied.

  • For details about stamp positions, see Stamps.

  • For details about how to enter text, see "Entering Text (When Using the Classic Applications)", Getting Started.

  • You can change the settings for Stamp Text under [Stamp Text] in User Tools. For details, see Stamp Text.

PreviousNext