Previous
Select a color mode.
Press [Edit / Color].
Press [Color].
Press [Erase Color].
Select the color to be erased.
Up to four colors can be erased at the same time.
Press [OK] twice.
Place the originals, and then press [Start].
To cancel the selection, press the selected (highlighted) key.
When [Color] is selected, the full color counter values will increase.
The width of the color to be erased can be adjusted in five levels. When the width of the color is set to [Wider] under [Color Sensitivity] in User Tools and red has been specified, colors close to orange and purple will be erased. You can change the setting. For details, see Adjust Color Image.
