Skip header
 

Procedure for Duplex Copying (Classic)

1Press [Dup./Combine/Series].

Operation panel screen illustration

2Make sure that [Duplex] is selected.

If [Duplex] is not selected, press [Duplex].

3Select [1 Sided 2 Sided] or [2 Sided 2 Sided] according to how you want the document to be output.

To change the original or copy orientation, press [Orientation].

Operation panel screen illustration

4Press [OK].

5Place the originals.

6Press [Original Orientation].

7Select the original orientation, and then press [OK].

8Select the paper tray.

9Press [Start].

Note

  • You cannot use the following copy paper with this function:

    • Translucent paper

    • Label paper (adhesive labels)

    • OHP transparencies

    • Postcards

    • Envelopes

    • Coated paper

    • Thick Paper 3

  • When an odd number of originals are placed in the ADF, the back of the last page of copied paper is blank.

  • You can also select [1 Sided 2 Sided] or [2 Sided 2 Sided] directly by pressing the function key. In that case, specify the original orientation under [Original Settng], and then proceed to Step 6.

  • For details about the sizes, orientations, and weights of paper that can be used in the Duplex function, see "Specifications for the Main Unit", Maintenance and Specifications.

  • You can specify the margins under [Edit] in User Tools. For details, see Edit.

PreviousNext