Original Orientation

When you cannot place the original in a readable orientation () as noted above, such as when you copy A4 size originals, or if you are copying an original that is folded or wrinkled, select the orientation of the original as follows.

• 90 Degrees Counterclockwise ()

  Select this mode when you set the original rotated 90 degrees counterclockwise. For example, set the original in the ADF with its upper side to the left.

• 180 Degrees ()

  Select this mode when you set the original rotated 180 degrees. For example, set the original in the ADF with its upper side to the front.

• 90 Degrees Clockwise ()

  Select this mode when you set the original rotated 90 degrees clockwise. For example, set the original on the ADF with its upper side to the right.

You will not get the printing result you expect unless you set the correct orientation for the original, especially if you want to set the Duplex or Combine functions.

About how to use the application's screen, see "[Copy] Screen".

For details about how to use the Classic Copier function, see Procedure for Selecting the Original Orientation (Classic).