PS Menu

You can specify how long the printer waits (in seconds) before canceling the current job when the job is interrupted while being processed. If you select [Use Machine Setting(s)], enter a value between 0 to 999. (Default: 0)

Default: [Use Driver/Command]

• Use Driver/Command

• Use Machine Setting(s)

You can specify how long the printer waits (in seconds) before it denies receiving a job when the printer cannot determine when the job ends. If you select [Use Machine Setting(s)], enter a value between 0 to 999. (Default: 300)

Default: [Use Driver/Command]

• Use Driver/Command

• Use Machine Setting(s)

You can specify whether or not to print on both sides of a sheet. If you specify duplex printing, you must also specify the binding method.

Default: [Off]

• Off

• Long Edge Bind

• Short Edge Bind

You can specify whether or not to print blank pages.

Default: [On]

• On

• Off

You can select the data format from Binary Data or TBCP.

When binary data is sent from the printer driver when the printer is working with a USB connection, the print job is canceled.

Default: [Binary Data]

• Binary Data

• TBCP

When an Ethernet connection is used, the print job is canceled if:

• The printer driver data format is TBCP and the data format selected using the control panel is Binary Data.

• The printer driver data format is binary and the data format selected using the control panel is TBCP.

You can specify the resolution.

Default: [600dpi]

• 600 dpi

• 1200dpi