This section describes the parameters that can be set on the [Tray Paper Settings].
Only installed trays appear on the display panel.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Ppr Tray Priority:Printer
You can specify a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is specified for a print job.
It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.
Default: [Tray 1]
Bypass Tray
Tray 1
Tray 2
Printer Bypass Paper Size
You can specify the paper size for the bypass tray.
Default: A4
Paper Size:Trays 1 to 2
You can specify the paper size for Trays 1 to 2.
Default: A4
Paper Type: Bypass Tray
You can specify the paper type for the bypass tray.
Default: [Plain Paper 2]
APS
You can specify whether or not to feed paper from the bypass tray when printing with the Auto Tray Select feature enabled.
Default: [On]
On
Off
Duplex
You can specify whether or not to enable duplex printing.
Default: [On]
On
Off
Paper Type:Trays 1 to 2
You can specify the paper type for Trays 1 to 2.
Default: [Plain Paper 2]
APS
You can specify whether or not to feed paper from Tray 1 or Tray 2 when printing with the Auto Tray Select feature enabled.
Default: [On]
On
Off
Duplex
You can specify whether or not to enable duplex printing.
Default: [On]
On
Off
For details about available trays for each paper size and type, see Paper Size Specifications and Paper Type Specifications.