Printed documents can be folded using the optional Finisher and Multi-folding unit or the optional Booklet Finisher attached to the machine.

If the PCL 6 printer driver is used, the fold function can be specified in the [Finishing] menu on the [Detailed Settings] tab. If the PCL 5c printer driver is used, Z-fold can be specified in the [Setup] tab. For printing methods, see the printer driver Help.

Important

  • For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Getting Started.

  • When bidirectional communication is disabled, configure option settings for the machine using the printer driver. If options are not set correctly in the printer driver, you cannot make fold settings even if a finisher with the fold function is installed. For details, see "Configuring Option Settings for the Printer", Driver Installation Guide.

Related topics

Using the Multi-Folding Unit
Using the Booklet Finisher
PreviousNext