General Features

You can register text phrases you often use when specifying settings, such as ".com" and "Regards".

You can register up to 40 entries.

• Program / Change

  1. Press [Home] () at the bottom of the screen in the center.

  2. Press the [User Tools] () icon on the [Home] screen.

  3. Press [Machine Features].

  4. Press [System Settings].

  5. Check that [General Features] is selected.

  6. Press [Program / Change / Delete User Text].

  7. Check that [Program / Change] is selected.

  8. Select the user text you want to change.

     To program a new user text, press [*Not Programmed].

  9. Enter the user text, and then press [OK].

     Enter the user text up to 80 characters.

  10. Press [Exit].

  11. Press [User Tools] () on the top right of the screen.

  12. Press [Home] () at the bottom of the screen in the center.

• Delete

  1. Press [Home] () at the bottom of the screen in the center.

  2. Press the [User Tools] () icon on the [Home] screen.

  3. Press [Machine Features].

  4. Press [System Settings].

  5. Check that [General Features] is selected.

  6. Press [Program / Change / Delete User Text].

  7. Press [Delete].

  8. Select the user text you want to delete.

  9. Press [Yes].

  10. Press [Exit].

  11. Press [User Tools] () on the top right of the screen.

  12. Press [Home] () at the bottom of the screen in the center.

The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down).

Default: [Up]

You can change the screen color.

Default: [Blue-gray]

This setting is applied to the classic application screens.

Interleave Priority is given to the mode selected.

Default: [Display Mode]

You can set the length of time the machine waits before changing modes when using the multi-access function.

This is useful if you make many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions.

Default: [Set Time], [3 second(s)]

When you select [Set Time], enter the time (3-30 seconds, in steps of 1 second) using the number keys.

The Function Reset Timer setting is ignored if [Switch Every Specified No.] or [Job Order] is set for Interleave Priority.

Specify when to switch the screen if an event occurs in a different application because there have been no key inputs for a certain period of time in the application screen.

Only the machine administrator can specify the settings.

Default: [Set Time], [3 second(s)]

Set the number of sheets to be output at the time of operation by interruption.

Default: [10 sheet(s)]

Specify a tray to which documents are delivered.

Default: [Copy Tray]

Specify a tray to which documents are delivered.

Default: [Copy Tray]

Specify a tray to which documents are delivered.

Default: [Copy Tray]

Specify a tray to which documents are delivered.

Default: [Copy Tray]

You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.

Default: [Normal]

The key repeat function is available only on the classic application screens.

You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.

(mainly Europe and Asia)

Default: [mm]

(mainly North America)

Default: [inch]

Specify how long to display the System Status and Job List display for.

Default: [On], [15 second(s)]

When the setting is [On], you can specify a display time between 10 and 999 seconds in steps of 1 second using the number keys.

Specify the time interval between printing jobs.

Default: [Set Time], [3 seconds]

Set when to raise the ADF plate after placing originals on the Auto Document Feeder (ADF).

Default: [When Original is Set]

If you select [When Original is Set], the ADF plate is raised immediately after placing originals on the Auto Document Feeder (ADF). The first page with [When Original is Set] mode is output faster than the one with [When Start Key Pressed] mode.

If you select [When Start Key Pressed], the ADF plate is raised after pressing [Start].

Select this setting if you use originals such as those with multiple pages or thin sheets and they need to be placed and aligned on the ADF.

You can specify the layout for an external keyboard which is connected to the USB Host Interface port.

Default: [Off]

The following languages can be set:

(mainly Europe)

[English], [German], [Standard French], [Belgian French], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], [Turkish], and [Greek]

(mainly Asia)

[English], [German], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], and [Turkish]

(mainly North America)

[English], [German], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], and [Turkish]

You can enable or disable the Compatible ID setting.

If this setting is set to [Active], you can install the printer driver automatically by connecting a computer to the machine via USB or network.

Default: [Active]

You can register "Product ID" and "Vendor ID" information for a USB keyboard or IC card reader device to the device list to limit the usage of USB devices. The "Product ID" and "Vendor ID" information for a USB device have been assigned by the manufacturer to identify the individual device. "Product ID" input settings are between 0 and 0xFFFF. "Vendor ID" input settings are between 0x0001 and 0xFFFE. Up to ten pairs of "Product ID" and "Vendor ID" information can be registered.

Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the machine, such as Address Book Management or Browser.

Default: [Off]

If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.

Specify whether or not the machine detects a person approaching it. If [Active] is selected and the machine detects a person approaching it while Energy Saver mode is enabled, it enters standby mode automatically and can reduce the time to recover to a normal state.

Default: [Active]

If you specify Z-folding, set the fold-back position in 1 mm (0.04") increments. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: 2 - 25 mm

• B4 JIS: 2 - 17 mm

• A4: 2 - 17 mm

• 11 × 17: 2 - 20 mm

• 8¹/₂ × 14: 2 - 17 mm

• 8¹/₂ × 11: 2 - 17 mm

• Other Paper Sizes: 2 - 17 mm

Inch version:

• A3: 0.08" - 1.00"

• B4 JIS: 0.08" - 0.68"

• A4: 0.08" - 0.68"

• 11 × 17: 0.08" - 0.80"

• 8¹/₂ × 14: 0.08" - 0.68"

• 8¹/₂ × 11: 0.08" - 0.68"

• Other Paper Sizes: 0.08" - 0.68"

If you specify half folding, set the fold-back position in 1 mm (0.04") increments. Single-sheet Fold or Multi-sheet Fold position can be adjusted. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: -10 - 10 mm

• B4 JIS: -10 - 10 mm

• A4: -10 - 10 mm

• 11 × 17: -10 - 10 mm

• 8¹/₂ × 14: -10 - 10 mm

• 8¹/₂ × 11: -10 - 10 mm

• Other Paper Sizes: -10 - 10 mm

Inch version:

• A3: -0.40" - 0.40"

• B4 JIS: -0.40" - 0.40"

• A4: -0.40" - 0.40"

• 11 × 17: -0.40" - 0.40"

• 8¹/₂ × 14: -0.40" - 0.40"

• 8¹/₂ × 11: -0.40" - 0.40"

• Other Paper Sizes: -0.40" - 0.40"

If you specify letter fold-out folding, set the fold-back position in 1 mm (0.04") increments. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: -10 - 10 mm

• B4 JIS: -10 - 10 mm

• A4: -10 - 10 mm

• 11 × 17: -10 - 10 mm

• 8¹/₂ × 14: -10 - 10 mm

• 8¹/₂ × 11: -10 - 10 mm

• Other Paper Sizes: -10 - 10 mm

Inch version:

• A3: -0.40" - 0.40"

• B4 JIS: -0.40" - 0.40"

• A4: -0.40" - 0.40"

• 11 × 17: -0.40" - 0.40"

• 8¹/₂ × 14: -0.40" - 0.40"

• 8¹/₂ × 11: -0.40" - 0.40"

• Other Paper Sizes: -0.40" - 0.40"

If you specify letter fold-in folding, set the fold-back position in 1 mm (0.04") increments. Single-sheet Fold or Multi-sheet Fold position can be adjusted. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: 2 - 7 mm

• B4 JIS: 2 - 7 mm

• A4: 2 - 7 mm

• 11 × 17: 2 - 7 mm

• 8¹/₂ × 14: 2 - 7 mm

• 8¹/₂ × 11: 2 - 7 mm

• Other Paper Sizes: 2 - 7 mm

Inch version:

• A3: 0.08" - 0.28"

• B4 JIS: 0.08" - 0.28"

• A4: 0.08" - 0.28"

• 11 × 17: 0.08" - 0.28"

• 8¹/₂ × 14: 0.08" - 0.28"

• 8¹/₂ × 11: 0.08" - 0.28"

• Other Paper Sizes: 0.08" - 0.28"

If you specify double parallel folding, set the fold-back position in 1 mm (0.04") increments. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: -10 - 10 mm

• B4 JIS: -10 - 10 mm

• A4: -10 - 10 mm

• 11 × 17: -10 - 10 mm

• 8¹/₂ × 14: -10 - 10 mm

• 8¹/₂ × 11: -10 - 10 mm

• Other Paper Sizes: -10 - 10 mm

Inch version:

• A3: -0.40" - 0.40"

• B4 JIS: -0.40" - 0.40"

• A4: -0.40" - 0.40"

• 11 × 17: -0.40" - 0.40"

• 8¹/₂ × 14: -0.40" - 0.40"

• 8¹/₂ × 11 -0.40" - 0.40"

• Other Paper Sizes: -0.40" - 0.40"

If you specify gate folding, set the fold-back position in 1 mm (0.04") increments. The setting ranges of the folding position for each paper size are shown below:

Metric version:

• A3: 2 - 12 mm

• B4 JIS: 2 - 12 mm

• A4: 2 - 12 mm

• 11 × 17: 2 - 12 mm

• 8¹/₂ × 14: 2 - 12 mm

• 8¹/₂ × 11: 2 - 12 mm

• Other Paper Sizes: 2 - 12 mm

Inch version:

• A3: 0.08" - 0.48"

• B4 JIS: 0.08" - 0.48"

• A4: 0.08" - 0.48"

• 11 × 17: 0.08" - 0.48"

• 8¹/₂ × 14: 0.08" - 0.48"

• 8¹/₂ × 11: 0.08" - 0.48"

• Other Paper Sizes: 0.08" - 0.48"

Specify the number of sheets for each paper size that are aligned at one time when printouts are saddle-stitched.

The number of sheets that can be set are as follows:

• A3: 0 - 2 sheets

• B4 JIS: 0 - 2 sheets

• A4: 0 - 2 sheets

• B5: 0 - 2 sheets

• 12 × 18: 0 - 2 sheets

• 11 × 17: 0 - 2 sheets

• 8¹/₂ × 14: 0 - 2 sheets

• 8¹/₂ × 13²/₅: 0 - 2 sheets

• 8¹/₂ × 11: 0 - 2 sheets

• 8K: 0 - 2 sheets

• Other Paper Sizes: 0 - 2 sheets

Default: [2 sheets]