This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.
UNIX: Use the "stat" parameter and the "rsh", "rcp", and "ftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Use the "status" command.
Messages | Description |
---|---|
Add staples (Booklet: Back) | The staple of booklet finisher (back) is exhausted. |
Add staples (Booklet: Both) | The staple of booklet finisher is exhausted. |
Add staples (Booklet: Front) | The staple of booklet finisher (front) is exhausted. |
Adjusting... | The machine is initializing or calibrating. |
Call Service Center | There is a malfunction in the machine. |
Canceling Job... | The job is being reset. |
Configuring... | Setting is being changed. |
Cover Open: Drawer | The drawer is open. |
Cover Open: Finisher Front | The front cover of Finisher is open. |
Cover Open: Interposer Base | The interposer base cover is open. |
Cover Open: Interposer Cover | The interposer cover is open. |
Cover Open: LCT Cover | The LCT upper cover is open. |
Cover Open: Lower Front Cover | The lower front cover is open. |
Cover Open: Lower Right Cover | The lower right cover is open. |
Cover Open: Mailbox | The mailbox cover is open. |
Cover Open: Toner Cover | The toner cover is open. |
Cover Open: Upper Right Cover | The duplex unit is not correctly set. |
Cover Open: Upper Right Cover | The upper right cover is open. |
Cover Open:FoldUnit Front Cover | The folding unit front cover is open. |
Current Job Suspended | The current job is suspended. |
Empty: Black Toner | The black print cartridge is almost empty. |
Empty: Black Toner Cartridge | The black print cartridge is empty. |
Empty: Cyan Toner | The cyan print cartridge is almost empty. |
Empty: Cyan Toner Cartridge | The cyan print cartridge is empty. |
Empty: Magenta Toner | The magenta print cartridge is almost empty. |
Empty: Magenta Toner Cartridge | The magenta print cartridge is empty. |
Empty: Yellow Toner | The yellow print cartridge is almost empty. |
Empty: Yellow Toner Cartridge | The yellow print cartridge is empty. |
Energy Saver Mode | The machine is in Energy Saver Mode. |
Error: Ethernet Board | An Ethernet board error has occurred. |
Error: HDD Board | A hard disk drive board error has occurred. |
Error: Optional Font | An error has occurred in the font file of the machine. |
Error: Parallel I/F Board | An error has occurred in the parallel interface. |
Error: PDL | An error has occurred in the page description language. |
Error: Rem. Certificate Renewal | An error has occurred in the remote server renewal. |
Error: USB Interface | An error has occurred in the USB interface. |
Error: Wireless Card | There is a problem with IEEE802.11a/b/g/n interface unit, or it is not supported. |
Full: Copy Tray | The copy tray is full. |
Full: Finisher Booklet Tray | Booklet tray of Finisher is full. |
Full: Finisher Shift Tray | Shift tray of Finisher is full. |
Full: Finisher Upper Tray | Finisher's upper tray is full. |
Full: Folding Unit Tray | The folding unit tray is full. |
Full: Hole Punch Receptacle | Punch Chip receptacle for hole punch is full. |
Full: Mailbox Tray 1 | The mailbox tray 1 is full. |
Full: Mailbox Tray 2 | The mailbox tray 2 is full. |
Full: Mailbox Tray 3 | The mailbox tray 3 is full. |
Full: Mailbox Tray 4 | The mailbox tray 4 is full. |
Full: Mailbox Tray 5 | The mailbox tray 5 is full. |
Full: Mailbox Tray 6 | The mailbox tray 6 is full. |
Full: Mailbox Tray 7 | The mailbox tray 7 is full. |
Full: Mailbox Tray 8 | The mailbox tray 8 is full. |
Full: Mailbox Tray 9 | The mailbox tray 9 is full. |
Full: Waste Staples | The waste staples are full. |
Full: Waste Toner | The waste toner is full. |
Hex Dump Mode | It is a hex dump mode. |
In Use: Folding Unit | Other function is using the folding unit. |
In Use: Input Tray | Other function is using the input tray. |
In Use: Staple Unit | Other function is using the staple unit. |
Independent-supplier Toner | Toner that is not recommended is set. |
Jobs Suspended | All jobs are suspended. |
Loading Toner... | Toner is being supplied. |
Low Power Mode | The machine is in Low Power Mode. |
Low: Black Toner | The black print cartridge is not set correctly, or toner is almost running out. |
Low: Cyan Toner | The cyan print cartridge is not set correctly, or toner is almost running out. |
Low: Magenta Toner | The magenta print cartridge is not set correctly, or toner is almost running out. |
Low: Yellow Toner | The yellow print cartridge is not set correctly, or toner is almost running out. |
Malfunction: Finisher | There is a problem with the finisher. |
Malfunction: Folding Unit | There is a problem with the folding unit. |
Malfunction: Interposer | There is a problem with the interposer or twin interposer. |
Malfunction: LCT | There is a problem with the large capacity tray. |
Malfunction: Multi-hole Punch | There is a problem with the multi-hole punch unit. |
Malfunction: Output Tray | There is a problem with the output tray. |
Malfunction: Staple Unit | There is a problem with the staple unit. |
Malfunction: Tray 1 | There is a problem with tray 1. |
Malfunction: Tray 2 | There is a problem with tray 2. |
Malfunction: Tray 3 | There is a problem with tray 3. |
Mismatch: Paper Size | Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type | Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type | Indicated paper tray does not contain paper of selected type. |
Nearly Full: Waste Toner | Waste toner bottle is nearly full. |
Near Replacing: Cleaning Web | The cleaning web is almost empty. |
Need more Staples | Stapler has almost run out of staples. |
No Paper: Selected Tray | There is no paper in specified tray. |
Not Detected: Black Toner | Black toner is not correctly set. |
Not Detected: Cleaning Web | The cleaning web is not correctly set. |
Not Detected: Cyan Toner | Cyan toner is not correctly set. |
Not Detected: Fusing Unit | The fusing unit is not correctly set. |
Not Detected: Input Tray | The paper feed tray is not correctly set. |
Not Detected: Interposer | The interposer is not correctly set. |
Not Detected: LCT | Large capacity tray is not correctly set. |
Not Detected: Magenta Toner | Magenta toner is not correctly set. |
Not Detected: Waste Toner Bottle | Waste toner bottle is not correctly set. |
Not Detected: Yellow Toner | Yellow toner is not correctly set. |
Not Detected:Transfer Clnng. U. | The transfer cleaning unit is not correctly set. |
Offline | Machine is offline. |
Paper in Aligner Tray | The paper remains in the aligner tray. |
Paper in Folding Unit | The paper remains in the folding unit. |
Paper Misfeed: ADF | The paper has jammed in ADF. |
Paper Misfeed: Duplex Feed Unit | The paper has jammed in the duplex feed unit. |
Paper Misfeed: Finisher | The paper has jammed in Finisher. |
Paper Misfeed: folding unit | The paper has jammed in the folding unit. |
Paper Misfeed: Input Tray | The paper has jammed in the input tray. |
Paper Misfeed: Interposer | The paper has jammed in the interposer or twin interposer. |
Paper Misfeed: Mailbox | The paper has jammed in the mailbox. |
Paper Misfeed: Output Tray | The paper has jammed in the output tray. |
Printing... | Printing is in progress. |
Proxy User/Password Incorrect | The proxy user name and/or password setting is incorrect. |
RC Gate Connection Error | RC Gate communication error has occurred. |
Ready | The machine is ready to print. |
Renewing Remote Certificate | The remote certificate is being renewed. |
Replace Cleaning Web | It is time to replace the Cleaning Web. |
Reset IPDS fonts | An IPDS font error has occurred. |
SD Card Authentication failed | SD card authentication failed. |
Supplies Order Call failed | The supply order call has failed. |
Suspend / Resume Key Error | The stop button of Finisher SR4110 was pressed. |
Tray Error: Chaptering | The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing. |
Tray Error: Duplex Printing | Selected paper tray cannot be used for duplex printing. |
Warming Up... | The machine is warming up. |
Check the error contents that may be printed in the configuration page.