Previous
This section describes recommended paper sizes and types.
If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam may occur.
Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
Tray 1
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 |
A4
81/2 × 11 | 1,250 sheets × 2 |
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | *1
81/2 × 11
A4 | 1,250 sheets × 2 |
*1 To load paper any of the sizes specified above, contact your service representative.
Tray 1 (A3/11 × 17 tray unit)
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 |
A3
11 × 17 | 1,000 sheets |
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | *1
A4
A3 | 1,000 sheets |
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | Custom size*2:
Vertical: 210.0–305.0 mm Horizontal: 210.0–439.0 mm
Vertical: 8.27–12.00 inches Horizontal: 8.27–17.28 inches | 1,000 sheets |
*1 To load paper any of the sizes specified above, contact your service representative.
*2 For details about how to load custom size paper, contact your service representative.
Trays 2 and 3
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | Paper sizes that can be detected automatically:
A3
A4 | 550 sheets |
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | Select the paper size using the Tray Paper Settings menu:
A5 8K
A3 8K | 550 sheets |
52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 | Custom size:
Vertical: 100.0–330.2 mm Horizontal: 139.7–487.7 mm
Vertical: 3.94–13.00 inches Horizontal: 5.50–19.20 inches | 550 sheets |
Tab stock*1 163.0 g/m2 (90.0 lb. Index), 199.0 g/m2 (110.0 lb. Index) | A4 | 200 sheets |
Envelopes | Select the paper size using the Tray Paper Settings menu: 41/8 × 91/2 | C6 Env |
*1 The tab sheet holder is required.
Bypass tray
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | Paper sizes that can be detected automatically:
A3
11 × 17 |
|
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | *1
11 × 17 12 × 18
A3 11 × 15 |
|
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | Custom size*2:
Vertical: 90.0–330.2 mm Horizontal: 139.7–487.7 mm*3
Vertical: 3.55–13.00 inches Horizontal: 5.50–19.20 inches*3 |
|
Translucent paper | A3 | 50 sheets |
Label paper (adhesive labels) | A4 | 1 sheet |
Tab stock 163.0 g/m2 (90.0 lb. Index), 199.0 g/m2 (110.0 lb. Index) | A4 | 20 sheets |
Envelopes | *1, *5 41/8 × 91/2 | 10 sheets |
*1 Select the paper size. For copier mode, see "Copying from the Bypass Tray", Copy/ Document Server. For printer mode, see Specifying regular sizes using the control panel.
*2 Enter the paper size. For copier mode, see "Copying from the Bypass Tray", Copy/ Document Server. For printer mode, see Specifying a custom size paper using the control panel.
*3 When the banner paper guide tray is installed, available paper length is 139.7–1,260.0 mm (5.50–49.60 inches).
*4 You can load 1 sheet of paper that has a horizontal width of 487.8–1,260 mm (19.21–49.60 inches) into the banner paper guide tray.
*5 Available paper sizes differ depending on the options that are installed. For details about the available paper sizes for each option, see the specifications of each option.
LCT
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 |
A4
81/2 × 11 | 4,400 sheets |
52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | *1
B5 JIS
A4 | 4,400 sheets |
*1 To load paper any of the sizes specified above, contact your service representative.
Extension unit
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 |
A4
81/2 × 11 | 2,500 sheets |
52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | *1
A4
A4 | 2,500 sheets |
*1 To load paper any of the sizes specified above, contact your service representative.
Wide LCT
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | Paper sizes that can be detected automatically:
A3
A3 | 2,200 sheets |
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | Select the paper size using the Tray Paper Settings menu:
A6 8K
A4 8K | 2,200 sheets |
52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4 | Custom size:
Vertical: 100.0–330.2 mm*1 Horizontal: 139.7–487.7 mm
Vertical: 3.94–13.00 inches*1 Horizontal: 5.50–19.20 inches | 2,200 sheets |
Translucent paper | A3 | 1,000 sheets |
High Gloss Coated Paper (Matte) Coated Paper (Glossy) | Paper sizes that can be detected automatically:
A3
A3 | 2,200 sheets *4 |
High Gloss Coated Paper (Matte) Coated Paper (Glossy) | Select the paper size using the Tray Paper Settings menu:
A6 8K
A4 8K | 2,200 sheets *4 |
High Gloss Coated Paper (Matte) Coated Paper (Glossy) | Custom size:
Vertical: 100.0–330.2 mm*1 Horizontal: 139.7–487.7 mm
Vertical: 3.94–13.00 inches*1 Horizontal: 5.50–19.20 inches | 2,200 sheets *4 |
Label paper (adhesive labels) | A4 | 20 sheet |
Tab stock*2 163.0 g/m2 (90.0 lb. Index), 199.0 g/m2 (110.0 lb. Index) | A4 | 1,000 sheets |
Envelopes | *3 Select the paper size using the Tray Paper Settings menu: 41/8 × 91/2 | 10 sheets |
*1 The postcard side fences are required to load paper that is between 100.0 and 139.2 mm (3.94 and 5.48 inches).
*2 The tab sheet fence is required.
*3 Available paper sizes differ depending on the options that are installed. For details about the available paper sizes for each option, see the specifications of each option.
*4 If a paper jam occurs or if the machine makes a strange noise when feeding stacks of paper, feed the paper from the bypass tray one sheet at a time.
Interposer
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
64.0–216.0 g/m2 (17.1 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | Paper sizes that can be detected automatically:
A3
A3 | 200 sheets |
64.0–216.0 g/m2 (17.1 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | *1
11 × 17
81/2 × 13 | 200 sheets |
*1 If you want to make these sizes detectable, contact your service representative.
Twin interposer
Paper type and weight | Paper size | Paper capacity |
|---|---|---|
64.0–216.0 g/m2 (17.1 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | Paper sizes that can be detected automatically:
A3
A3 | 240 sheets × 2 |
64.0–216.0 g/m2 (17.1 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | Select the paper size using the Tray Paper Settings menu:
B5 JIS 12 × 18
A4 11 × 15 | 240 sheets × 2 |
64.0–216.0 g/m2 (17.1 lb. Bond–79.9 lb. Cover) Thin Paper–Thick Paper 2 | Custom size:
Vertical: 139.7–330.2 mm Horizontal: 139.7–487.7 mm
Vertical: 5.50–13.00 inches Horizontal: 5.50–19.20 inches | 240 sheets × 2 |
Paper Thickness
Paper Thickness*1 | Paper weight |
|---|---|
Thin Paper*2 | 52.3–65.9 g/m2 (14.0–17.9 lb. Bond) |
Plain Paper 1 | 66.0–80.9 g/m2 (18.0–21.9 lb. Bond) |
Plain Paper 2 | 81.0–100.9 g/m2 (22.0–27.0 lb. Bond) |
Middle Thick | 101.0–127.4 g/m2 (27.1 lb. Bond–46.9 lb. Cover) |
Thick Paper 1 | 127.5–150.0 g/m2 (47.0–55.0 lb. Cover) |
Thick Paper 2 | 150.1–216.0 g/m2 (55.1–79.9 lb. Cover) |
Thick Paper 3 | 216.1–256.0 g/m2 (80.0 lb. Cover–141.0 lb. Index) |
Thick Paper 4 | 256.1–300.0 g/m2 (141.1–165.0 lb. Index) |
*1 Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change the paper weight setting to thinner or thicker.
*2 When loading paper of 52.3–65.9 g/m2 (14.0–17.9 lb. Bond), the edges may crease or the paper misfeed depending on the paper type.
Certain types of paper, such as translucent paper, may produce noise when delivered. This noise does not indicate a problem and print quality is unaffected.
The paper capacity described in the tables above is an example. Actual paper capacity might be lower, depending on the paper type.
When loading paper, make sure the stack height does not exceed the limit mark of the paper tray.
If multiple sheet feeding occurs, fan sheets thoroughly or load sheets one by one from the bypass tray.
Flatten out curled sheets before loading them.
Depending on the paper sizes and types, the copy/print speed may be slower than usual.
When loading thick paper of 127.5–300.0 g/m2 (47.0 lb. Cover–165.0 lb. Index), see Thick paper.
When loading envelopes, see Envelopes.
When copying or printing onto letterhead paper, the paper placing orientation is different depending on which function you are using. For details, see Loading Orientation-fixed Paper or Two-sided Paper.
If you load paper of the same size and same type in two or more trays, the machine automatically feeds from one of the trays in which [Yes] is selected for [Apply Auto Paper Select] when the first tray in use runs out of paper. This function is called Auto Tray Switching. This saves interrupting a copy run to replenish paper when making a large number of copies. You can specify the paper type of the paper trays under [Paper Type]. For details, see "Tray Paper Settings", Connecting the Machine/ System Settings. For details about the Auto Tray Switching function, see "General Features", Copy/ Document Server.
When loading label paper:
We recommend that you use specified label paper.
It is recommended to place one sheet at a time.
It is recommended to load the paper in
orientation. When you load paper in 
orientation, label paper may curl after it is printed.Select [Label Paper] for [Paper Type] in [Tray Paper Settings].
When loading translucent paper:
It is recommended to place one sheet at a time.
When loading translucent paper, always use long grain paper, and set the paper direction according to the grain.
Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent paper before loading.
Remove copied or printed sheets one by one.
When loading coated paper:
To print on coated paper: press the [User Tools] icon (
), press [Tray Paper Settings], and then, for each tray's [Paper Type] be sure to specify [Paper Type] to [Coated: Matte] or [Coated: Glossy], and [Paper Thickness] to the appropriate paper thickness.To print on high-gloss coated paper: press the [User Tools] icon (
), press [Tray Paper Settings], and then, for each tray's [Paper Type], be sure to set [Paper Type] to [Coated Paper: High Gloss].When loading coated paper or glossy paper, always fan the paper before using it.
If a paper jam occurs or if the machine makes a strange noise when feeding stacks of coated paper, feed the coated paper from the bypass tray one sheet at a time.
