Previous
Access to some User Parameter settings may require options, or other settings may need to be made beforehand.
It is recommended that you print and keep a User Parameter list when you program or change a User Parameter.
Do not change any bit switches other than those shown on the previous pages.
Press [Fax Features].
Press [Initial Settings].
Press [Parameter Setting].
Select the switch number you want to change.
Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat this step to change another bit number for the same switch.
Press [OK].
Repeat Step 4 through 6 to change the switch settings.
After all the settings are finished, press [Exit].
Press [Exit].
