Skip header
 

Category/Attribute List

User Lockout Policy

  1. Lockout

    Whether the lockout is active (Active) or inactive (Inactive) is recorded.

  2. Number of Attempts before Lockout

    The number of times a user may enter a login password is recorded.

  3. Lockout Release Timer

    Whether the lockout release timer is active (Active) or inactive (Inactive) is recorded.

  4. Lock Out User for

    The time until lockout release is recorded.

Auto Logout Timer

  1. Auto Logout Timer

    Whether an auto logout time is set to (On) or (Off) is recorded.

  2. Auto Logout Time(seconds)

    The time until lockout release is recorded.

Device Certificate

  1. Operation Mode

    The type of operation is recorded.

    "Create" is recorded when a certificate is created.

    "Delete" is recorded when a certificate is deleted.

    "Install" is recorded when a certificate is installed.

    When the certificate to be used is changed, "Change Application to Use Certificate" is recorded.

    When an intermediate certificate is installed, "Install Intermediate Certificate" is recorded.

    When an intermediate certificate is deleted, "Delete Intermediate Certificate" is recorded.

  2. Certificate No.

    The number of the certificate to be used is recorded.

  3. Certificate No. (XXX)

    (XXX) is replaced by one of the following:

    • IEEE 802.1X(WPA/WPA2)

    • IPsec

    The number of the certificate for applications is recorded.

    When a certificate is not used, "Do not Use" is recorded.

IPsec

  1. IPsec

    Whether IPsec is active (Active) or inactive (Inactive) is recorded.

  2. Encryption Key Auto Exchange: Setting1-4: Remote Address

    The remote address is recorded.

  3. Encryption Key Auto Exchange: Setting1-4, Default Setting: Security Level

    The security level is recorded.

    When [Authentication Only] is selected, "Authentication Only" is recorded.

    When [Authentication and Low Level Encryption] is selected, "Authentication and Low Level Encryption" is recorded.

    When [Authentication and High Level Encryption] is selected, "Authentication and High Level Encryption" is recorded.

    When [User Settings] is selected, "User Settings" is recorded.

  4. Encryption Key Auto Exchange: Setting1-4, Default Setting: Authentication Method

    The authentication method used for the auto key exchange format is recorded.

    Either "PSK" or "Certificate" is recorded.

Compulsory Security Stamp

  1. Compulsory Security Stamp

    Whether [Compulsory Security Stamp] is set to (On) or (Off) is recorded.

WIM Auto Logout Timer(minutes)

  1. Web Image Monitor's auto logout timer log is recorded in increments of one minute.