Skip header
 

Configuring the Auto-Reset Function

The print volume counter can be reset at a specified time.

Options

Details

Every Month

Resets the print volume at the specified time/date each month.

Specify Date

Resets the print volume (only once) at the specified time/date.

Specify Cycle

Resets after the specified interval from a reference date, then resets thereafter at the same interval.

1Log in as the machine administrator from the control panel.

2Specify when the counter is reset.

[System Settings] [Administrator Tools] [Volm Use Cntr:Scheduld/Specfid Rst Stng] [Every Month], [Specify Date], or [Specify Cycle]

3Specify the conditions.

Specify the conditions [OK]

4Log out.

Note

  • If the printer is turned off at the specified time, the print volume will be reset when the power is turned on thereafter.

  • If you select in [Every Month] a date, such as the 31st, which is missing on some months, the print volume will be reset at 12:00 am on the 1st of the month following such a month.

  • This can also be specified via Web Image Monitor. For details, see Web Image Monitor Help.

PreviousNext