Previous
Configuration:
Desktop
Print process:
LED alley and electro-photographic printing
First print speed:
(mainly Europe and Asia)Full color: 7.5 seconds
B&W: 6.0 seconds
(mainly North America)Full color: 7.5 seconds
B&W: 5.9 seconds
Print speed:
One-side printing: 30 pages per minute (A4
)Two-side printing: 28 pages per minute (A4
)
Resolution:
1200 × 1200 dpi
Equivalent to 600 × 2400 dpi
Equivalent to 600 × 1200 dpi
600 × 600 dpi
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 200 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
500 sheets |
Bypass tray |
100 sheets |
250-sheet paper feed unit |
250 sheets |
500-sheet paper feed unit |
500 sheets |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
- (mainly Europe and Asia)
220–240 V, 50/60 Hz, 5 A
- (mainly North America)
120–127 V, 60 Hz, 9 A
Power consumption (complete system):
Maximum: 1,200 W
The complete system consists of the main unit and the three optional paper feed units.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Power consumption (main unit only):
- (mainly Europe and Asia)
Ready: 40.2 W
During printing:
Full color: 488 W
B&W: 463 W
- (mainly North America)
Ready: 40.9 W
During printing:
Full color: 488 W
B&W: 463 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
18 seconds
Dimensions (W × D × H):
400 × 515 × 387 mm (15.8 × 20.3 × 15.3 inches)
There are protrusions of 16 mm (0.7 inches) on the control panel and 20 mm (0.8 inches) on the handles of the standard paper tray.
When the control panel is tilted, the height increases by up to 79 mm (3.2 inches).
When Tray 1 is extended, the depth increases by 58.6 mm (2.4 inches).
Weight:
Approx. 33 kg (72.8 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
40.0 dB (A)
Printing
Full color:
65.3 dB (A)
B&W:
64.7 dB (A)
Complete system
Stand-by
40.0 dB (A)
Printing
68.3 dB (A)
Sound pressure level:
Main unit only
Stand-by
34.0 dB (A)
Printing
Full color:
59.3 dB (A)
B&W:
58.7 dB (A)
Complete system
Stand-by
34.0 dB (A)
Printing
Full color:
62.3 dB (A)
B&W:
61.9 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit and the three optional paper feed units.
Memory:
Standard 2 GB
Hard disk:
320 GB (Optional)
Interfaces:
Standard:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
USB device server (10BASE-T/100BASE-TX/1000BASE-T)
Printer Language:
PCL 5/6, PostScript 3 Emulation, PDF, Adobe PostScript 3/PDF (optional), PictBridge (optional)
Fonts:
Standard:
PostScript 3 Emulation: 93 fonts
Optional:
Adobe PostScript 3/PDF: 136 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASE-TX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6)
First print speed, power consumption, warm-up time, sound power level and sound pressure level may differ depending on the conditions and environment of the printer.
