This section explains precautions to add toner when it has run out, and how to dispose of used toner.
|
|
|
|
|
|
|
|
|
|
|
Always replace the print cartridge when a notification appears on the display.
Errors may occur if you use toner other than the recommended one.
When adding toner, do not turn off the main power. Otherwise, settings will be lost.
Store toner where it will not be exposed to direct sunlight, temperatures rise above 35 °C (95 °F), or high humidity.
Store toner on a flat surface.
Do not shake the print cartridge with its mouth down after removing it. Residual toner may scatter.
Do not repeatedly install and remove print cartridges. This will result in toner leakage.
Do not touch the shutter on the bottom side of the print cartridge.
Replace the print cartridge when the following message appears on the display. Follow the instruction on the screen regarding how to replace the print cartridge.
Replace the print cartridge when the following messages appear on the display:
"Out of toner"
“No color toner. Color toner is required to print in black & white with the current paper type. Replace the color Print Cartridge or press [Job Reset] to cancel printing.”
When the following messages appear on the display, the print cartridge has almost run out. Have a replacement print cartridge at hand.
“Toner Cartridge is almost empty. Replace Toner Cartridge.”
If print cartridge are not changed when necessary, printing will become impossible. We recommend keeping a stock of print cartridge.
Print cartridge (consumables) are not covered by warranty. However, if there is problem, contact the store where they were purchased.