Skip header
 

Setting Gradation Correction Values

Correct the gradation in two areas: bright areas (highlights), and medium areas (midtones). [Print Test Pattern 1] or [Print Test Pattern 1 for Calibration] is used to set the correction value for highlights, and [Print Test Pattern 2] or [Print Test Pattern 2 for Calibration] is used for mid tones.

1Press the [User Tools] key, and then correct the gradation.

[Maintenance: Image] [Color Calibration] [Adjust Auto Density] [Start]

The confirmation message appears when complete. Press [Exit].

2Print the selected sheet, and then correct the gradation.

[Print Test Pattern 1 for Calibration] or [Print Test Pattern 2 for Calibration] Select the color you want to adjust Adjust the correction value for the selected color [OK]

Enter the value between 0 and 6.

3Check the result by printing the calibration sheet, and then save the settings.

[Print Result] [Yes]
PreviousNext