The table below shows the list of setting items. For details about their functions, see System.
Print Error Report |
On, Off (default) |
|
Auto Continue |
Off (default), Immediate, 1 minute, 5 minutes, 10 minutes, 15 minutes |
|
Store and Skip Errored Job |
On |
1-999 page(s) Default: "3" pages |
Off |
||
Memory Overflow |
Do not Print (default), Error Information |
|
Paper Size Error Detect |
Detect (default), Do not detect |
|
Auto Cancel Conf. for PDL Error Job |
Display, Do not Display (default) |
|
Auto Cancel for Print Job(s) on Error |
On, Off (default) |
|
Rotate by 180 Degrees |
On, Off (default) |
|
Print Compressed Data |
On, Off (default) |
|
Memory Usage |
Font Priority, Frame Priority (default) |
|
Duplex |
Off (default), Long Edge Bind, Short Edge Bind |
|
Copies |
1 to 999 copies (in increments of 1) Default: "1" |
|
Blank Page Print |
On (default), Off |
|
Spool Printing |
On, Off (default) |
|
Jobs Not Printed As Machine Was Off |
Print When Machine On, Do not Print (default) |
|
Restrict Direct Print Jobs |
Off (default), Automatcly. Store Jobs, Cncl All Direct Prt Jobs |
|
Switch Initial Screen |
Job List (default), Print Jobs |
|
Printer Language |
Auto (default), PCL, PS, PDF, XPS |
|
Default Printer Language |
PCL (default), PS, PDF, XPS |
|
Sub Paper Size |
Auto (default), Off |
|
Page Size |
Default:
A4
81/2 × 11 |
|
Letterhead Setting |
Off, Auto Detect (default), On (Always) |
|
Tray Setting Priority |
Ppr. Conf. for Bypass T. |
Display, Do not Display (default) |
Bypass Tray |
Driver/Command (default), Machine Setting(s), Machine Setting(s): Any Type, Any Size/Type, Any Custom Size/Type |
|
Trays 1–4 |
Driver/Command, Machine Setting(s) (default) |
|
Papr Thckness by Type if Comnd selctd for Tray Setg Prio |
Letterhead: Bypass Tray |
Thin Paper 56-65 g/m2 Plain Paper 1 66-74 g/m2 Plain Paper 2 75-90 g/m2 (default) Middle Thick 91-128 g/m2 Thick Paper 1 129-163 g/m2 Thick Paper 2 164-220 g/m2 |
Letterhead: Tray 1-4 |
Thin Paper 56-65 g/m2 Plain Paper 1 66-74 g/m2 Plain Paper 2 75-90 g/m2 (default) Middle Thick 91-128 g/m2 Thick Paper 1 129-163 g/m2 Thick Paper 2 164-220 g/m2 |
|
Label Paper |
Thin Paper 56-65 g/m2 Plain Paper 1 66-74 g/m2 Plain Paper 2 75-90 g/m2 Middle Thick 91-128 g/m2 Thick Paper 1 129-163 g/m2 Thick Paper 2 164-220 g/m2 (default) |
|
Envelope |
Thick Paper 1 129-163 g/m2 Thick Paper 2 164-220 g/m2 (default) |
|
CoatedPpr: Bypass Tray |
Thick Paper 1 129-163 g/m2 (default), Thick Paper 2 164-220 g/m2 |
|
CoatedPpr: Trays 1-4 |
Thick Paper 1 129-163 g/m2 (default), Thick Paper 2 164-220 g/m2 |
|
Edge to Edge Print |
On, Off (default) |
|
Tray Switching |
On, Off (default) |
|
RAM Disk |
0 MB, 2 MB, 4 MB (default), 8 MB, 16 MB |
|
Extended Auto Tray Switching |
On, Off (default) |
|
I/O Buffer |
128 KB (default), 256 KB |
|
I/O Timeout |
10 seconds, 15 seconds (default), 20 seconds, 25 seconds, 60 seconds |