Skip header
 

Connecting the Telephone Line Region B icon (mainly North America)

To connect the machine to a telephone line, use a snap-in modular type connector.

CAUTION

  • A telephone line cable with a ferrite core must be used for RF interference suppression.

Important

  • Make sure the connector is the correct type before you start.

Illustration of connecting the telephone line numbered callout illustration

  1. G3 interface unit connector

  2. External telephone connector

Note

  • Use the supplied modular cable with a ferrite core. Connect the end of the cable with the ferrite core to the machine.

    Illustration of a modular cable with ferrite core

PreviousNext