Previous
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not be printed correctly, depending on how the originals and paper are placed.
Settings for the User Tools
Copier mode
Specify [Yes] for [Letterhead Setting] in [Input / Output] under the Copier / Document Server Features menu, and then place the original and paper as shown below.
Printer mode
Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer Features menu, and then place the paper as shown below.
For details about the letterhead settings, see "Input / Output", Copy/ Document Server, or "System", Print.
Original orientation and paper orientation
The meanings of the icons are as follows:
Icon |
Meaning |
|---|---|
|
Place or load paper scanned or printed side face up. |
|
Place or load paper scanned or printed side face down. |
Original orientation
Place the originals as shown below.
Original orientation
Exposure glass
ADF
Unreadable orientation
Readable orientation
Paper orientation
Copier mode
When placing originals in the ADF and copying on orientation-fixed paper from the bypass tray, specify the paper size.
Copy side
Paper trays
Bypass tray*1
One-sided
Two-sided
*1 If you place originals in the ADF and copy on orientation-fixed paper from the bypass tray without specifying the paper size, the image might be copied upside down. In order to make copies correctly, place the paper upside down or specify the paper size.
Printer mode
Print side
Paper trays
Bypass tray
One-sided
Two-sided
In copier mode:
For details about how to make two-sided copies, see "Duplex Copying", Copy/ Document Server.
In printer mode:
To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you must specify [Letterhead] as the paper type in the printer driver's settings.
If a print job is changed partway through printing from one-sided to two-sided printing, one-sided output after the first copy may be printed facing a different direction. To ensure all paper is output facing the same direction, specify different input trays for one-sided and two-sided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing.
For details about how to make two-sided prints, see "Printing on Both Sides of Sheets", Print.
