Skip header
 

Logging Out Using an IC Card

Log out from the machine by waving your IC card over the machine when Quick Card Authentication is specified.

Important

  • When waving an IC card over the machine, align the card's orientation to the mark displayed on the label.

  • Wave only one IC card over the machine at a time.

1Wave your IC card over the label showing where the NFC card reader is.

The label is behind the control panel.

You will log out from the machine.

Note

  • You can also log out from the machine by pressing [Logout] in the top right corner of the screen.

  • Instead of using an IC card, you can also log in to the machine by waving over the machine a smart device equipped with a RICOH Smart Device Connector.