Skip header
 

Remote Transmission

Before the operation, confirm that the main power switch of the main-machine is turned on.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [Remote Fax] icon.

3Place the original into the ADF or on the exposure glass.

4Make the scan settings you require.

For details, see Scan Settings.

5Specify a destination.

6Press [Start].

Note

  • For the following functions, use information stored or registered on the sub-machine:

    • Information registered in the Address Book

    • LDAP server settings