Previous
You can specify the following five output modes in [Reception File Settings] on the Fax Features menu.
Store
Forwarding
Print
Standby to Print (Prohibit Auto Print)
All received documents are stored in memory and are not automatically printed. You can print them by pressing [Print Standby to Print Files] in [Reception File Settings].
ID Required Print (Print by entering the Memory Lock ID or the Print ID)
All received documents are stored in memory and are not automatically printed. You can print them by entering the Memory Lock ID or the Print ID.
You can specify both the settings configured for receiving all documents and the settings configured for receiving documents for a specific period or line.
Settings configured for receiving all documents
Configure the settings in [Store], [Forwarding], [Print], [Prohibit Auto Print], or [Memory Lock Reception].
Settings configured for receiving documents for a specific period or line
Configure the settings in [Output Mode Switch Timer].
For details about configuring the settings for each item, see Reception File Settings.
In addition, you can configure settings for receiving all documents so that you can route received documents using SUB Codes, or route e-mail received via SMTP. For details about how to register, see the following:
