Skip header
 

Procedure for specifying an IP-Fax destination manually (classic)

1Make sure that [Fax] is selected.

2Press [Select Line].

3Select [H.323] or [SIP], and then press [OK].

4Press [Manual Entry].

Operation panel screen illustration

5Enter the IP-Fax destination, and then press [OK].

To add a destination, press [Add], and then specify the next destination.

If you use the Address Book to specify the next destination, press the destination key.

Note

  • To change the specified destination, press [Edit Dest.], and then re-enter the destination.

  • Depending on the security settings, [Manual Entry] might not appear and you might not be able to enter the IP-Fax destination.

  • IP-Fax will be available only if the gateway (T.38-compliant), gatekeeper, and SIP server are compatible with this machine. For a list of certified compatible gateways, gatekeepers, and SIP servers, contact your local retail or service representative.

  • For details about text entry, see "Entering Text (When Using the Classic Applications)", Getting Started.

  • For the maximum number of digits that can be included in a destination, see Maximum Values.

PreviousNext