Skip header
 

Spread Duplex

You can copy a two-page spread original onto both sides of the paper.

Important

  • You cannot use the ADF with this function.

There are two types of Spread Duplex.

Spread 2 Sided

Copies a two-page spread original onto one sheet with one page per side.

Illustration of Spread Duplex

Spread 2 Sided (Spread)

Copies each two-page spread original as it is onto both sides of a sheet.

Illustration of Spread Duplex

The following table shows the paper sizes for Spread 2 Sided when the reproduction ratio is 100%:

Original

Paper

A4Landscape

A5Portrait (2-sided)

81/2 ×11Landscape

51/2 × 81/2Portrait (2-sided)

1Press [Original Settng].

Operation panel screen illustration

2Select the (Operation panel screen illustration) or (Operation panel screen illustration), and then press [OK].

Operation panel screen illustration

3Press [Dup./Combine/Series].

4Press [Spread Dplx.].

5Select [Spread ][ 2 Sided] or [Spread ][ 2 Sided (Spread)].

Operation panel screen illustration

6Press [OK].

7Select the paper tray.

8Place the originals, and then press [Start].

Note