Skip header
 

Procedure for erase center (classic)

Erases the center margin of the original image.

1Press [Edit / Stamp].

Operation panel screen illustration

2Press [Erase].

3Press [Erase Center / Border].

4Press [Erase Center].

5Specify the erase width with [Plus] and [Minus].

Operation panel screen illustration

Pressing [Plus] or [Minus] changes the width in increments of 1 mm (0.1 inches). Pressing and holding down the relevant key changes the width in increments of 10 mm (1 inch).

6Press [OK] twice.