Skip header
 

Procedure for copying onto custom size paper (classic)

Paper that has a horizontal length of 60.0–216.0 mm (2.37–8.5 inches) and a vertical length of 127.0–900.0mm (5.0–35.43 inches) can be fed in from the bypass tray.

1Load the paper face up in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press [Sharp].

3Press [Paper Size].

4Press [Custom Size].

5Enter the horizontal size with the number keys, and then press [Sharp].

Operation panel screen illustration

6Enter the vertical size with the number keys, and then press [Sharp].

7Press [OK] twice.

8Place the originals, and then press [Start].

Note