Log in as the machine administrator from Web Image Monitor.
Point to [Device Management], and then click [Configuration].
Click [Print Volume Use Limitation] under "Device Settings".
Select [Stop Job] or [Finish Job and Limit] in the "Machine Action When Limit is Reached" list.
If you do not want to limit print volume, select [Allow Continue Use].
For each print condition, enter a per-page unit count between "0" and "200" in [Print Volume Use Limitation: Unit Count Setting].
If you specify "0" for a print condition, no volume restriction is applied to jobs matching that condition.
Click [OK].
Log out.
Log in as the machine administrator from the control panel.
Specify the printer behavior when printing limit is reached.
[System Settings] |
If you do not want to limit print volume, select [Allow Continue Use].
Enter a per-page unit count.
[Print Volume Use Limitation: Unit Count Setting] |
If you specify "0" for a print condition, no volume restriction is applied to jobs matching that condition.
Log out.
This can also be specified via Web Image Monitor. For details, see the procedure for SP C340DN.