Skip header
 

Auto Logout

After you log in, the printer automatically logs you out if you do not use the control panel within a given time. This feature is called "Auto Logout". Specify how long the printer is to wait before performing Auto Logout.

SP C340DN

1Log in as the machine administrator from Web Image Monitor.

2Point to [Device Management], and then click [Configuration].

3Click [Timer] under "Device Settings".

4Select [On] in "Auto Logout Timer".

If you do not want to specify "Auto Logout Timer", select [Off].

5Enter "10" to "999" (seconds), and then click [OK].

6Log out.

Note

  • If a paper jam occurs or toner runs out, the printer might not be able to perform the Auto Logout function.

SP C342DN

1Log in as the machine administrator from the control panel.

2Enable Auto Logout.

[System Settings] [Timer Settings] [Auto Logout Timer] [On]

3Set the time.

[Change] enter "10" to "999" (seconds) [OK]

If you make a mistake, press [Clear].

4Press [OK].

5Log out.

Note

  • If a paper jam occurs or toner runs out, the printer might not be able to perform the Auto Logout function.

  • This can also be specified via Web Image Monitor. For details, see the procedure for SP C340DN.

PreviousNext