Previous
Configuration:
Desktop
Print process:
Laser beam scanning & Electrophotographic printing
4 drums tandem method
First print speed:
Full color: 13.5 seconds
B&W: 13.5 seconds
Print speed:
One-side printing: 25 pages per minute (A4
)Two-side printing: 25 pages per minute (A4
)
Resolution:
600 × 600 dpi Speed (1 bit)
600 × 600 dpi Standard (2 bits)
1200 × 1200 dpi (1 bit)
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 150 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
500 sheets |
Bypass tray |
100 sheets |
500-sheet paper feed unit |
500 sheets |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
(mainly Europe and Asia)220–240 V, 50/60 Hz, 6 A
(mainly North America)120–127 V, 60 Hz, 11 A
Power consumption (complete system):
Maximum: 1,300 W
The complete system consists of the main unit and the three optional paper feed units.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Power consumption (main unit only):
Ready: 60 W
During printing: 650 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
16 seconds
20 seconds
Dimensions:
Width |
Depth |
Height |
|
|---|---|---|---|
SP C340DN |
400 mm (15.8 inches) |
480 mm (18.9 inches) |
387 mm (15.3 inches) |
SP C342DN |
400 mm (15.8 inches) |
480 mm (18.9 inches) |
404–467 mm (15.9–18.4 inches) |
Weight:
Approx. 29 kg (63.9 lb.)
Approx. 29 kg (63.9 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
28 dB (A)
Printing
Full color:
62 dB (A)
B&W:
62 dB (A)
Complete system
Stand-by
28 dB (A)
Printing
65 dB (A)
Sound pressure level:
Main unit only
Stand-by
25 dB (A)
Printing
Full color:
51 dB (A)
B&W:
50 dB (A)
Complete system
Stand-by
25 dB (A)
Printing
54 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit and the one optional paper feed unit.
Memory:
Standard 512 MB, up to 2 GB (with the standard SDRAM module)
Hard disk:
320 GB (Optional)
Interfaces:
Standard:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
USB device server (10BASE-T/100BASE-TX/1000BASE-T)
Printer Language:
PCL5c/6, PostScript 3, PDF, PictBridge (optional), XPD (optional)
Fonts:
PCL 5c/PCL 6:
45 fonts, 13 International fonts
PostScript 3, PDF:
136 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6), IPX/SPX
First print speed, power consumption, warm-up time, sound power level and sound pressure level may differ depending on the conditions and environment of the printer.
