Previous
Color Registration
You can perform automatic adjustment of color registration. For details, see Adjusting the Color Registration.
Color Calibration
You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing. For details, see Correcting the Color Gradation.
Adjust Auto Density
You can print the gradation of auto density.
Print Test Pattern 1 for Calibration
You can print gradation correction sheet 1.
Print Test Pattern 2 for Calibration
You can print gradation correction sheet 2.
Reset Setting
You can reset the gradation correction value to default.
Adjust Print Position
You can adjust the starting position of the printing page. For details, see Adjusting Printing Position.
Print Test Sheet
You can print the registration test sheet.
Only the installed trays appear on the display panel.
Paper Trays 1–2
Bypass Tray
Duplex Unit
Adjust Position
You can specify the start position for printing on a page.
Only the installed trays appear on the display panel.
Horizontal: Trays 1-2
Horizontal: Bypass Tray
Horizontal: Back Side
Vertical: Trays 1–2
Vertical: Bypass Tray
Vertical: Back Side
4 Color Graphic Mode
You can adjust levels of toner color overlap. If characters or lines blur, setting priority on text may make them clearer. Under normal conditions, set priority on photos.
Default: [Photo Priority]
Text Priority
Photo Priority
