Skip header
 

Machine Modes (SP C340DN)

Copies

You can specify the number of copies to print.

If the number of copies to print is specified by command or the printer driver, this setting is overridden.

Default: 1

  • 1 to 999

Page Size

You can specify the default paper size. The default paper size is used when the paper size is not specified in the print data.

Default:

Region A icon(mainly Europe and Asia)

A4

Region A icon(mainly North America)

81/2 × 11

  • Region A icon(mainly Europe and Asia)

    A4, A5, A6, B5 JIS, B6 JIS, C5 Env, C6 Env, DL Env, 81/2 × 14, 81/2 × 132/5, 81/2 × 13, 81/2 × 12, 81/2 × 11, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 41/8 × 91/2, 37/8 × 71/2, 16K, Custom Size

  • Region B icon(mainly North America)

    81/2 × 14, 81/2 × 132/5, 81/2 × 13, 81/2 × 11, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 41/8 × 91/2, 37/8 × 71/2, A4, A5, A6, B5 JIS, B6 JIS, C5 Env, C6 Env, DL Env, 16K, Custom Size

Edge to Edge Print

Select to whether or not to print using the whole area of paper, leaving no edge borders.

Default: [Off]

  • On

  • Off

Duplex

You can specify whether or not to print on both sides of a sheet. If you specify duplex printing, you must also specify the binding method.

Default: [None]

  • None

  • Long Edge Bind

  • Short Edge Bind

Rotate by 180 Degrees

You can specify whether or not to rotate the print image by 180 degrees.

Default: [Off]

  • On

  • Off

Blank Page Print

You can specify whether or not to print blank pages.

Default: [On]

  • On

  • Off

Letterhead Setting

You can specify whether or not to print on paper that has a fixed print side or print direction (letterhead paper, for example). For details, see Loading Orientation-Fixed Paper or Two-Sided Paper.

Default: [Auto Detect]

  • Off

    The letterhead printing mode is disabled.

  • Auto Detect

    You can specify whether or not to print using letterhead mode whenever a page that has a fixed print side or print direction is specified as the first page.

  • On (Always)

    Print with the letterhead printing mode regularly.

Tray Setting Priority

You can specify whether or not the paper size and type settings that are applied are those specified using the control panel, printer driver, or print command.

Bypass Tray

You can specify whether or not the paper size and type settings applied for the bypass tray are those specified using the control panel, printer driver, or print command.

Default: [Driver/Command]

  • Driver/Command

    When the source paper tray is specified for a print job, the paper settings specified using the printer driver or by print command are applied, regardless of any settings specified using the control panel.

  • Machine Setting(s)

    The paper settings specified on the printer's control panel are applied to all print jobs. An error may occur if the paper settings specified using the printer driver or by print command do not match those specified using the control panel.

  • Machine Settg(s): Any Type

    Printing is performed according to the paper size specified using the printer driver or print command and the paper type specified on the machine. Regardless of the type of paper in the paper tray, you can print properly by specifying a paper type using the printer driver or print command.

  • Any Size/Type

    If paper that matches the settings specified in the printer driver or commands is not loaded in any of the printer's paper trays, you can proceed with printing by applying the settings to the bypass tray. This function supports PS3, PDF, PCL, and XPS.

  • Any Custom Size/Type

    If a custom paper size is specified in the printer driver or commands, and the matching paper is not loaded in any of the printer's paper trays, you can proceed with printing by applying the settings to the bypass tray. This function supports PS3, PDF, PCL, and XPS.

Trays 1 to 2

You can specify whether the paper size and type settings applied for Trays 1 to 4 are those specified using the control panel, printer driver, or print command.

Default: [Machine Setting(s)]

  • Driver/Command

  • Machine Setting(s)

Tray Switching

You can specify whether or not the printer automatically switches paper trays when paper of the specified size and type is not loaded in the driver-designated tray.

Default: [Off]

  • On

  • Off

Extend Auto Tray Switching

You can set the printer to switch paper trays automatically, regardless of whether the tray is manually or automatically selected.

Default: [Off]

  • On

  • Off

PCL Char.Thickness Adjust.

Specify whether or not to thicken the typeface if characters appear blurred when printing through the PCL 5c or PCL6 printer driver.

Default: [Off]

  • On

  • Off