The table below shows the list of setting items. For details about their functions, see System (SP C340DN).
Print Error Report |
On, Off (default) |
|
Auto Continue |
Off (default), Immediate, 1 minute, 5 minutes, 10 minutes, 15 minutes |
|
Memory Overflow |
Do not Print (default), Error Information |
|
AutoCncl for Prt Job onErr |
On, Off (default) |
|
Printer Language |
Auto (default), PCL, PS, PDF |
|
Sub Paper Size |
Auto (default), Off |
|
Default Printer Lang. |
PCL (default), PS, PDF |
|
Low Power Mode Timer |
Low Power Mode Timr On/Off |
On, Off (default) |
Low Power Mode Timer |
1 minute (default), 15 minutes, 30 minutes, 45 minutes, 60 minutes, 120 minutes, 240 minutes |
|
Sleep Mode Timer |
Sleep Mode On/Off |
On (default), Off |
Sleep Mode Timer |
1 minute (default), 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 minutes, 120 minutes, 240 minutes |
|
Weekly Timer |
Daily (Web Preset Time), Day of Week(Preset Time), Inactive (default) |
|
Weekly Timer Code |
On |
Up to 8 digits |
Off (default) |
||
ECO Night Sensor |
Mode Setting |
Auto Power Off Only (default), Auto Power Off and On, Inactive |
Timer to Turn Off |
1 minute, 5 minutes, 30 minutes, 60 minutes, 120 minutes (default) |
|
Timer to Turn On |
1 minute (default), 5 minutes, 30 minutes, 60 minutes, 120 minutes |
|
Brightness Sensor Level |
|
|
Ready State After Printing |
Control Panel On, Cntrl Panel Off (EngySavg) (default) |
|
Stop Print at Output Limit |
Active, Inactive (default) |
|
Bypass Print: 64-84 mm |
Active, Inactive (default) |
|
B&W Print Priority |
On, Off (default) |
|
Anti-Humidity |
Anti-Humidity Setting |
On, Off (default) |
Anti-Humidity Level |
Level 1 (Weak) (default), Level 2 (Medium), Level 3 (Strong) |
|
Print Compressed Data |
On, Off (default) |
|
Memory Usage |
Font Priority, Frame Priority (default) |
|
B&W Page Detect |
Per Page (default), Per Job, Off |
|
RAM Disk |
0 MB, 2 MB, 4 MB (default), 8 MB, 16 MB |
|
Auto E-mail Notify |
On (default), Off |
|
Serial No. of Machine |
||
Main Pwr Off if Ntwrk Disc |
On (default), Off |