Skip header
 

Printing of documents stored when print configuration errors occur

If a document has been stored by [Store and Skip Errored Job] in [System] under [Printer Features], print the document using the control panel.

For details, see Storing jobs with errors automatically.

1Press the [Printer] icon on the [Home] screen.

2Select the file to print.

[Print Jobs] tab Select a type of job Select the files to print

You can simultaneously select all files of the same type by pressing [All Jobs] after selecting a file.

3Press [Preview] to display a print preview of the document as necessary.

4Press [Print].

If the printer driver is set with a password, enter the password.

If multiple print files are selected, and some of these require a password, files that correspond to the entered password and do not require a password are printed. The number of files to be printed is displayed on the confirmation screen.

5To change the number of copies, press [Change], and then enter a new number using the number keys.

6Press [Resume Prt.].

Note

  • If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.

  • To stop printing after printing has started, press [Exit] until the printer screen appears, and then press [Job Reset] or the [Suspend] key. A Stored Print file is not deleted even if [Job Reset] is pressed.

  • You can also print a file from Web Image Monitor. For details, see Web Image Monitor Help.