If the wireless access point in use supports WPS, the wireless LAN connection settings and security settings can be automatically configured in Infrastructure mode.
Press the [Menu] key, and then select the setting items using the [] or [
] key.
Select [Host Interface]
Press [OK]
Select [Network]
Press [OK]
Select [LAN Type]
Press [OK]
Select [Wireless LAN]
Press [OK]
Press [Escape]
Select [Wireless LAN]
Press [OK]
Select [Wireless LAN Easy Setup]
Press [OK]
Select [Push Button Method] or [PIN Code Method]
Press [OK]
If you select [Push Button Method], press the WPS button on the wireless LAN access point.
If you select [PIN Code Method], enter the displayed PIN code in the Registrar.
Press [Start]
When Wireless LAN Easy Setup is complete, press [OK].
Press the [User Tools] key, and then display the [Network] screen.
[System Settings] |
Select Wireless LAN as the network interface to be used.
[LAN Type] |
Press [Exit].
Display the [Wireless LAN Easy Setup] screen.
[Wireless LAN] |
The machine is waiting to connect to the access point.
Set up a Wireless LAN using WPS.
|