Skip header
 

Scan Size

Select the size of the original to be scanned.

[Auto Detect]

Scans original sizes using the automatic size detect function.

[Mixed Original Sizes]

Select [Mixed Original Sizes] to scan a batch of originals that have different lengths.

Originals are scanned by the ADF and the length of each is automatically detected.

[Partial Scan]

Select [Partial Scan] to scan an original partially.

You can specify the dimensions of an area to be scanned in millimeters or inches.

[Custom Size]

Select [Custom Size] to scan originals whose sizes do not match a standard template or to scan only a part of an original.

You can specify the length and width of your originals in mm or inches.

Regular size

Select a size to scan originals at a specified size regardless of the actual size of the originals you have placed.

You can specify the following template sizes:

A3, A4, A4, A5, A5, B4JIS , B5 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 132/5, 81/2 × 13, 81/2 × 11, 81/2 × 11, 51/2 × 81/2, 51/2 × 81/2

Note

  • [Mixed Original Sizes] can be selected for paper sizes larger than B5 or 81/2 × 11.

  • Selecting [Mixed Original Sizes] reduces the scanning speed.

  • If the size of an original placed in the ADF cannot be detected automatically, the original might be scanned at a different size. For details about paper sizes that can be automatically detected when placed in the ADF, see "Specifications for Scanner", Maintenance and Specifications.

  • Scan sizes registered in [Program / Change / Delete Scan Size] of the [Scan Settings] tab under [Scanner Features] are also displayed as regular sizes.

  • For details about the weights of paper that can be used in the Mixed Sizes mode, see "Recommended Original Sizes and Weights", Paper Specifications and Adding Paper.