Skip header
 

Current Machine Status

This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.

Messages

Description

Adjusting…

The machine is initializing or calibrating.

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Check Paper: Bypass Tray

Check that the paper size, orientation, and paper type are correct.

Configuring...

Setting is being changed.

Cover Open: Front Cover

The front cover is open.

Cover Open: Lower Right Cover 1

The lower right cover 1 is open.

Cover Open: Lower Right Cover 2

The lower right cover 2 is open.

Cover Open: Right Cover

The right cover is open.

Current Job Suspended

The current job is suspended.

Empty: Black Toner

The black toner cartridge is almost empty.

Empty: Black Toner Cartridge

The black toner bottle is empty.

Empty: Cyan Toner

The cyan toner cartridge is almost empty.

Empty: Cyan Toner Cartridge

The cyan toner bottle is empty.

Empty: Magenta Toner

The magenta toner cartridge is almost empty.

Empty: Magenta Toner Cartridge

The magenta toner bottle is empty.

Empty: Yellow Toner

The yellow toner cartridge is almost empty.

Empty: Yellow Toner Cartridge

The yellow toner bottle is empty.

Energy Saver Mode

The machine is in Energy Saver mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description language.

Error: Rem. Certificate Renewal

An error has occurred in the remote server renewal.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Card

There is a problem with IEEE802.11a/b/g/n interface unit, or they are not supported.

Full: Waste Toner

Waste Toner Bottle is full.

Hex Dump Mode

It is a hex dump mode.

In Use: Input Tray

Other function is using the paper tray.

Independent-supplier Toner

Toner cartridges other than genuine ones are set.

Jobs Suspended

All jobs are suspended.

Key Card not inserted

The machine is waiting for key card to be inserted.

Key Counter not inserted

The machine is waiting for key counter to be left in it.

Loading Toner…

Toner is being supplied.

Low: Black Toner

The black toner cartridge is not set correctly, or toner is almost running out.

Low: Cyan Toner

The cyan toner cartridge is not set correctly, or toner is almost running out.

Low: Magenta Toner

The magenta toner cartridge is not set correctly, or toner is almost running out.

Low: Yellow Toner

The yellow toner cartridge is not set correctly, or toner is almost running out.

Malfunction: Bypass Tray

There is a problem with the bypass tray.

Malfunction: Tray 1

There is a problem with Tray 1.

Malfunction: Tray 2

There is a problem with Tray 2.

Malfunction: Tray 3

There is a problem with Tray 3.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Size/Image Size

The paper size output from tray # does not match the image size.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

Nearly Full: Waste Toner

Waste Toner Bottle is nearly full.

No Paper: Selected Tray

There is no paper in the specified tray.

Not Detected: Black Toner

Black toner is not correctly set.

Not Detected: Cyan Toner

Cyan toner is not correctly set.

Not Detected: Fuser Unit

The fusing unit is not correctly set.

Not Detected: Input Tray

There is no paper in the specified tray or the paper tray is not correctly set.

Not Detected: Magenta Toner

Magenta toner is not correctly set.

Not Detected: PCU (C)

The photoconductor unit (cyan) is not correctly set.

Not Detected: PCU (K)

The photoconductor unit (black) is not correctly set.

Not Detected: PCU (M)

The photoconductor unit (magenta) is not correctly set.

Not Detected: PCU (Y)

The photoconductor unit (yellow) is not correctly set.

Not Detected: WasteToner Bottle

Waste Toner Bottle is not correctly set.

Not Detected: Yellow Toner

Yellow toner is not correctly set.

Offline

Machine is offline.

Paper in Duplex Unit

The paper remains in the duplex unit.

Paper Misfeed: Duplex Unit

The paper has jammed in Duplex Unit.

Paper Misfeed: Input Tray

The paper has jammed in the paper tray.

Paper Misfeed: Internal Path

The paper has jammed inside the machine.

Paper Misfeed: Internal Tray

The paper has jammed in the internal paper feed section.

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.

Note

  • Check the error contents that may be printed in the configuration page.