Skip header
 

IP-Fax Transmission and Reception

Network:

  • Standard: Ethernet interface (1000BASE-T/100BASE-TX/10BASE-T)

  • Optional: IEEE 802.11a/b/g/n wireless LAN interface

Scan line density:

  • Standard: 8 × 3.85 lines/mm, 200 × 100 dpi (Standard character), 8 × 7.7 lines/mm, 200 × 200 dpi (Detail character)

  • Optional: 8 × 15.4 lines/mm (Fine character), 16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character)

Maximum original size:

Standard: A3Landscape, 11 × 17Landscape

Custom: 297 × 1,200 mm (11.7 × 47.3 inches)

Maximum scanning size:

297 mm × 1,200 mm (11.7 × 47.3 inches)

Transmission protocol:

Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC 3261 compliant), H.323 v2

Compatible machines:

IP-Fax compatible machines

IP-Fax transmission function:

Specify an IP address and send faxes to an IP-Fax compatible fax through a network.

Also capable of sending faxes to a G3 fax connected to a telephone line via a VoIP gateway.

IP-Fax reception function:

Receive faxes sent from an IP-Fax compatible fax through a network.

Also capable of receiving faxes from a G3 fax connected to a telephone line via a VoIP gateway.

PreviousNext