Skip header
 

Optimum environmental conditions

WARNING


  • Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.

CAUTION


  • Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.


  • Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.


  • After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might move or come down to cause an injury.


  • Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

Important

  • Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the machine in places where chemical reactions are likely (laboratories, etc.), as doing so will cause the machine to malfunction.

Avoid the following environments when locating the machine. If the machine is placed somewhere where the conditions are different from those recommended, a failure may occur.