Skip header
 

Changing the User Parameters

Access to some User Parameter settings may require options, or other settings may need to be made beforehand.

It is recommended that you print and keep a User Parameter list when you program or change a User Parameter.

For details about printing a User Parameter list, see Initial Settings.

Important

  • Do not change any bit switches other than those shown on the previous pages.

1Press [Fax Features].

2Press [Initial Settings].

3Press [Parameter Setting].

4Select the switch number you want to change.

5Select the bit number you want to change.

When the bit number is pressed, the current value switches between 1 and 0.

Repeat this step to change another bit number for the same switch.

6Press [OK].

7Repeat Step 4 through 6 to change the switch settings.

8After all the settings are finished, press [Exit].

9Press [Exit].