Skip header
 

Scan Settings

This section describes the user tools in the Scan Settings menu under Fax Features.

Program / Change / Delete Scan Size

You can program, change, or cancel frequently used scan sizes.

For details about programming Scan Size, see Program / Change / Delete Scan Size.

Wait Time for Next Orig.: Exposure Glass

Specify the time the machine waits so that you can add another original when you use the exposure glass to send faxes by memory transmission. When you send multiple originals, place the original while the machine waits as specified in the setting, and then press [Start]. If the specified time elapses before you press [Start], only scanned originals are sent.

To terminate the waiting time and start transmission immediately, press [Sharp].

Default: [60 seconds]

Note

  • For details about how to change the Fax Features, see "Accessing User Tools", Connecting the Machine/System Settings.