Skip header
 

Procedure for sending originals using the ADF (classic)

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Fax (Classic)] icon.

3Make sure "Ready" appears on the screen.

4Press [Immed. TX].

Operation panel screen illustration

5Place the original into the ADF.

6Select the scan settings you require.

For details about the scan settings, see Scan Settings.

7Specify a destination.

If you make a mistake, press [Clear], and then enter again.

For details about specifying a destination, see Specifying a Destination.

8Press [Start].